In 1899 Nicola Tesla moved to Colorado
Springs Colorado, for one year, while there he developed his most
important discovery-Terrestrial Stationary Waves.
This proved that the earth could be
used as a conductor of electricity and would be as responsive as a
tuning fork to electrical vibrations at certain frequency's. He also
lighted two hundred street lamps from twenty-five miles away from the
transmission point without wires.
During this time he also invented
artificial lighting. He also believed that he received
interplanetary transmissions in his Colorado Springs laboratory,
which of course was met with laughter by the
inbred's in the scientific community.
J.P. Morgan lent his financial support
to Nicola to build a one hundred and eighty seven foot tower with a
sixty eight foot copper dome to send wireless signals to any point in
the world. The structure was called the Wardenclyffe
laboratory on long
Island in Shore-ham New York.
This
structure housed a Magnifying Transmitter.
The purpose of this incredibly monstrous facility was to broadcast
both power and communications with out wire to any point on the
globe. This huge magnifying transmitter would discharge high
frequency power, that would turn the earth into a huge dynamo which
would transmit it's power to anywhere in the world!
Nicola's vision of
wireless electricity was used to power ocean liners, destroy
warships, run industry and transportation and send communications all
over the world! We are talking 1905 here! Nicola suggested to the
public that this could be used for interplanetary communications,
lets hold this thought we will be returning to it in the next
chapter!
If Nikola believed
he could reach Mars with this very significant transmitter, then
Paris or Tokyo shouldn't be a problem. J.P. Morgan was concerned if
anybody on the planet could receive power from this new contraption,
then where should the meter be placed!
AAAAH, the old
money trail! If it isn't profitable for the money people then lets
kill the technology! Sometimes patriotism and money get confused,
more often then not they are one in the same. J.P.Morgan withdrew his
support, Nikola was put out of business! Ten years later during the
First World War the tower was demolished for war time security
reasons!
Gee, if Nikola was
able to proceed with this project would we perhaps have free or next
to free energy here in the United States and throughout the world.
Lets go back into world history maybe we have seen this or similar
technology before, sometime in world history!
----------------------------------------------------------------
Christopher Dunn in
his book the” Giza Power Plant: ancient: technologies of ancient
Europe”, Dunn gives evidence of advanced machinery and technologies
in ancient Egypt. Dunn claims that the earth is a giant power plant
and the pyramids, obelisks and megalithic structures are part of a
great power grid.
Dunn believes that
the Great Pyramid was a great power plant and that harmonic
resonators were housed in slots above the Kings Chamber. Dunn claims
that the Great Pyramid is among many artifacts that have been
misinterpreted and misunderstood by archeologists.
“ for the most
part, primitive tools that are discovered are considered
contemporaneous with artifacts of the same period. However during
this period of Egyptian history, artifacts were produced in prolific
quantities without any tools surviving to explain there creation.”The
ancient Egyptians created artifacts that can't be explained in simple
terms. These tools do not fully explain the state of the art that is
evident in the artifacts.
When you are in the
presence of these incredible Mesolithic structures from Baalbek to
the Valley of the Kings to the mountain top ancient cities of Peru,
the statues of Easter Island the pyramids of Mexico and Guatemala.
Then you look at the tools that these structures were suppose to be
built with! You feel like you are part of a joke being played on the
scientific community! How many logs does it take to roll a 80 foot
by15 foot thick rock weighing a 1,000 tons a couple of miles?
I think in this day
and age the common person is so use to incredible misinformation and
out right lies by governments and institution of higher education
that they are at the point that they will accept any flimsy
explanation other then what makes sense.
There are several
artifacts that there is only one intelligent description of the
production of the said artifact and that is powered milling or
production by that of lathe. These artifacts are all composed of hard
igneous rock. These hard pieces of granite artifacts show the same
machine markings that are seen today from cutting hard igneous rock
with modern equipment.
For over a century
archeologists have recognized that ancient Egyptians have used
circular saws, straight saws, drills and lathes. The lathe is the
most interesting tool of all in the shop's of the ancient's. How was
it that the ancient Egyptians were able to perform certain cuts and
patterns, which today are difficult even with the use of high speed
laser guided equipment?
Some of these
intricate patterns include concave and convex spherical radial
patterns, perfectly machined columns, bats, spindles, bowl's, cup's,
goblets, plates, vases and round boxes. Lathes were used for creating
round things, which there is plenty of evidence of in the ancient
world.
In the step pyramid
where Pharaoh Zoser's tomb is located there are twenty-one large
granite boxes each weighing sixty-five tons. They are thirteen feet
long eleven feet high and seven and a half feet wide.
These boxes were
placed in recesses in the floor's of crypts in the tunnels that were
part of the network of tunnels under the Giza Plateau. The question
arises in these tunnels where there was limited room, not enough to
contain hundreds of slaves to use as labor how were these granite
boxes weighing sixty-five tons apiece moved?
These boxes were
perfectly tooled polished and completely flat. They could have only
be produced by the use of high speed motorized machinery using what
we might refer to as modern techniques. These boxes are very typical
of much of the artifacts found throughout the ancient world. These
and other structures need to be studied by engineers who are open
minded and not controlled by political and religious agenda's.
With the evidence
of so many archeological sites containing so many artifacts created
with powered precision machinery it would be quite pausable that the
great pyramids of Egypt were built by a highly advanced supernatural
civilization that inhabited earth thousands of years ago.
Some have a hard
time moving past old archeological theories and have difficulty
accepting modern evidence of advanced modern machining of artifacts.
Perhaps it is time to give old theories a decent burial and put them
in the annals of history and move forward but to do so carefully as
to show due respect for elements of truth and reality that still
exist in past research and discoveries.
New technology and
knowledge is allowing us to review world history in a new light. What
we are seeing is this new light is showing cracks in the history that
we are being taught and has been taught for generations.
--------------------------------------------------
If the earth is a
resonator and vibrates as a power source how can we tap into this
energy? How can we turn this energy into usable electricity? If we
could do this wouldn't it be the greatest technology that we have
discovered to date? JP Morgan wouldn't love this!
If we had an
transducer and using the piezoelectric effect of earths vibrations on
quartz crystal. This means that alternating the compressions and
release on the quarts crystal creates electricity. This the principle
that microphones and certain other electrical devices work on.
When we speak into
a microphone the vibrations from the pressure waves of your voice
against the quartz in the microphone create electrical impulses. The
quartz crystal is the transducer! It transfer mechanical energy into
electrical energy.
If we understand
the source of the energy and if we have the means to tap into it, by
using quartz crystals, to convert the mechanical energy of earths
vibrations into electricity, we then have an inherent power source.
The Great Pyramid
of Giza Plateau was a geomechanical power source that responded to
the earth's vibrations and converted the vibrations into electricity!
They used this electricity to power their civilization. This would
include motorized power tools which they used to machine indigenous
rock with.
How does this power
plant work? Lets first take a look at the transducer. The transducers
for the pyramid power plants are built into the pyramid itself. The
transducers resonate the vibrations of the earth through the
structure of the pyramids.
The king's Chamber
of the Great Pyramid is in itself a transducer. Visitors have noticed
unusual effects within the chamber. Scientists refer to these unusual
effects as infrasonic vibrations from the earth. The earth itself is
a massive transducer.
Through the
passages and chambers of the pyramid are devices to aide in the
resonance of earth's vibrations. These devices could be thought of as
electrical devices because they have the ability to convert the
mechanical energy of the vibrations to electrical energy.
The granite out of
which the King's Chamber is built is an indigenous rock which
contains silicone quartz crystals. Scientists have analyzed this
granite and concluded that it contains 55% silicone quartz crystal.
This means that in the lining of the King's Chamber contains hundreds
of tons of microscopic quartz partials
These quartz
crystals contained in the granite of the king's Chamber are parallel
on the upper and lower edges. The weight of the granite in
conjunction with aggregate contained in the granite which gives a
slight amount of flex-ability which allows the chamber to act like a
electrical generator. This is because of the plasticity of the
aggregate in the granite allows a “piezotension” effect upon the
parallel surfaces of the quartz crystals which causes an
electromagnetic flow.
The inner chambers
of the Great Pyramid have been generating electrical energy for the
last forty six centuries. When a person is within the King's Chamber
he encounters a slight but definite magnetic field. Quartz crystal
does not create energy, it converts one form of energy into another.
Above the Kings
Chamber are five rows of granite beams, which are included in the
forty three beams in the entire pyramid which weigh seventy tons
apiece. Each beam is separated by a space which is big enough to
crawl into. The red granite beams were flat and parallel on three
sides but the top was untouched and was rough and uneven.
The only beams that
were visible were the one's visible on the ceiling of the King's
Chamber, however all of the beams were built with the same attention
to detail, including the ones in the upper most chamber sometimes
referred to as the Queens Chamber.
It is remarkable to
note that the thirty four granite beams that would not be visible
after the pyramid would be finished would be prepared with the same
attention to detail as the nine beams which formed the ceiling of the
King's Chamber.
All of the upper
chambers were floored with granite beams that were roughly dressed on
the bottom and flat and fair on the three sides. It makes one wonder
if their wasn't a motorized planer type piece of equipment that
prepared all of these beams so exact.
The granite beams
above the King's Chamber could be considered to be forty-three
separate bridges capable of sensing and conveying earths vibrations.
If just one of the bridges were to sense vibrations of a certain
frequency, then through harmonic's it would be possible for the other
beam (bridges) to also sense and conveying energy from the earths
vibrations.
If the energy
contained in the forcing frequency was great enough this transfer of
energy from one beam to another could affect the entire series of
beams. Therefore if one of the Beams in the King's Chamber had a
frequency forced upon it then it would be possible to transfer this
energy to the adjoining beams in the upper chamber, at the same
frequency or a harmonic of that frequency.
The amount of
energy absorbed by these beams from the source would be dependent on
the resonant frequency of the beams. The ability of the granite
beams to dissipated the energy that it receives is dependent also on
the resonance and the damping ability of the beams.
It is possible to
control the renonasance of the beams by altering the size and shape
of the beams. Similar to a radio operator tuning his antennae to meet
the wave length of the frequency he is operating on. Perhaps this is
why one side of the beam is rough so that they could be tuned to a
certain frequency by planeing the beam or drilling holes at certain
intervals to remove quartz particles.
Tests have been
conducted on these beams by using a frequency generator at a
predetermined fundamental frequency and the Kings Chamber resonated
this fundamental frequency and the entire structure of the chamber
reinforced this frequency that produced dominant frequencies that
created an F sharp cord. By amplifying the F sharp frequency you will
attain the harmonics produced by the earth. Indian Shamans tune
their flutes also to the F sharp because it is a “Sacred frequency
of mother Earth”.
Accelerometers were
placed in the spaces above the Kings Chamber to measure the frequency
produced at the granite beams, it is thought that the beams were
acting like baffles in a speaker. It is said that the King's Chamber
was resonating at 438 hertz, which is that of the earth's harmonics.
The ancients were
determined to tap into the earths harmonics over a very large area
inside of the pyramid and deliver that energy to the King's Chamber,
which was the power generator of the pyramid power plant, and thus
would greatly amplify the oscillations of the granite.
As earths
vibrations flowed through the Great Pyramid, the resonators converted
the vibrations into energy in the form of airborne sound. This was
created through the design of the angles and surfaces of the walls
and ceilings of the Grand Gallery which reflected the sound energy
and focused it into the king's Chamber .
The design of the
Grand Gallery was to channel the energy in the large spaces of the
the pyramid into the King's Chamber! This energy was then forced into
the granite resonating cavity at amplitude great enough to make the
granite beams oscillate!
These beams in the
King's chamber through harmonics caused the beams above them os
oscillate in a harmonic rhythm. The result of this is the input of
sound and proper resonate greated the whole complex of the pyramid to
become a mass of vibrating granite induced energy.
When Napoleon
visited the Great Pyramid he ordered his men to fire their weapons at
the top of the Grand Gallery and noted that the explosions were
reverberated into the far distance like rolling thunder!
When tourists visit
the Great Pyramid the guides will strike the coffer inside the King's
Chamber which gives a scary deep bell sound for the tourists to
witness the resonation of the King's Chamber first hand. This
resonance when tourists measure it with a meter is at 438htz. The
coffer inside of the King's Chamber was precisely tuned to this
frequency! The King's Chamber was also scientificly designed to
resonate sounds also at 438 htz!
But if we had a
power plant in ancient Egypt where was the power grid? How was the
energy stored? How was it distributed? How was it used?
Let's first review
microwaves!
